VAG Diagnosis Gateway Cable MFD28/32 Gen2
CANchecked
Kunde anmeldelser
Hjelp andre med å velge riktig. Bli den første til å skrive en anmeldelse!
Skriv en anmeldelseThe VAG diagnostic gateway cable harness is the consistent further development of the well-known VAG OBD cable. One end has the 8 and 10 compartment Molex connector for the MFD28 and MFD32 displays, the other end is a Y-cable with which we can loop the display into the gateway. With this wiring harness it is possible to keep the diagnostic socket free and to take Can High/Low as well as 12V ignition plus and ground directly from the drivetrain instead of the diagnostic bus. The advantages are obvious: data retrieval is accelerated and you can also use this wiring harness if you have a freely programmable ECU installed in your vehicle.
----------------
Guider og Info
| Bilmärke | VAG |
Vær den første til å skrive en anmeldelse om dette produktet!
Din kommentar:
For å legge inn en anmeldelse, må du være innlogget.
Verktøy
