Connection Cable - MFD28/32 Gen2 to OBD2 + K-Line
CANchecked
Kunde anmeldelser
Hjelp andre med å velge riktig. Bli den første til å skrive en anmeldelse!
Skriv en anmeldelseCANchecked Display OBD 2 Cable Kit for MFD28 / MFD32 / MFD32S
With the OBD 2 Cable Kit, you willl get the perfect accessory for CANchecked Display MFD28 / MFD32 / MFD32S displays. This OBD 2 cable allows you to display OBD 2 values on your display.
Finally, the OBD2 cable for CANchecked Displays is available! Installation takes just a few minutes, and you can conveniently read all OBD 2 values on your display. Even stored fault codes are displayed!
Simply use the pre-configured OBD TRI files to easily display the values. This way, you have all the important information right at your fingertips.
Here are the key facts about the CANchecked Display OBD 2 Cable Kit:
OBD connector with a 2-meter cable for connection to MFD28/MFD32/MFD32S The following pins are connected from the OBD connector to the display: Power supply, Ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14) The power cable is separately led out from the connector (approx. 15 cm) and must be connected to a free fuse slot in the fuse holder. If all slots are occupied, a standard and mini adapter are included in the delivery. the OBD 2 Cable Kit supports all OBD 2 values output by the control unit. You can display up to 128 values on your display, allowing you to gather even more information about your vehicle.
The package includes:
- 2-meter (6ft 6in) OBD 2 cable with Connector A and Connector B for the display
- Standard + Mini fuse adapters
Order the OBD 2 Cable Kit now and expand the functionality of your CANchecked Display. Get all the relevant vehicle data on your display and always stay in control.
----------------
Guider og Info
Vær den første til å skrive en anmeldelse om dette produktet!
Din kommentar:
For å legge inn en anmeldelse, må du være innlogget.
Verktøy
